Print

Arabian American Center Details Training & Development
Program Title:
Pipeline Design and Corrosion Assessment
Location:
Dubai
Date:
19.05.2019 - 23.05.2019
Fees:
$ 3900

Description

Introduction

    A five-day course on the practical aspects of piping and pipeline design, integrity, maintenance and repair. The participants will obtain an in-depth understanding of the ASME B31 code rules and API standards, their technical basis and practical application to field conditions.

     

   The course reviews and applies the ASME code design rules, strength and fracture design analysis and acceptance criteria.


   The participants will be able to recognize causes of degradation in-service, whether mechanically induced (pressure, vibration, fatigue, pressure transients, external damage) or due to corrosion (wall thinning, pitting, cracking), and apply integrity analysis techniques to make run-or-repair decisions.

     

   The participants will review inspection techniques, from the most common (PT, MT, UT, RT, MFL pigs) to most recent (AE, PED, UT pigs and multi pigs), and the implementation of integrity management programs, periodic inspections and evaluation of results.


   The course will review the various repair techniques, their advantages and shortcomings, and the step-by-step logic to be followed in making repair decisions and selecting the applicable repair.

 


Who Should Attend?

    The course is intended for engineers, maintenance technicians and inspectors responsible for the design, integrity, maintenance and repair of pipelines and piping systems


Course Objectives:

   At completion of this 5-day course, the participants will be have an in-depth understanding of the ASME B31 design, construction, inspection and testing rules; as well as their application to integrity assessment of operating systems.


   The participants will gain an in-depth knowledge of pipe and fitting material specifications, fabrication process and influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.

 

   The participant will understand the technical background to the design equations, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation. The course provides an in-depth, step-by-step review of operating transients in piping systems and pipelines, their cause, and the methods for their analysis.

 

   The course covers construction and welding practices, weld inspections, weld flaws and acceptance criteria. The course covers hydrotesting methods and alternative leak detection techniques.


   The participant will gain a practical understanding of piping and pipeline corrosion mechanisms, how to recognize them, classify them and resolve them.

     

   The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.


   The participants will review case histories of field failures and will evaluate their cause and solutions to avoid recurrence.


Course Outline:

     DAY 1 – MATERIALS AND SIZING

           INTRODUCTION

               • History of Pipeline Technology

               • ASME Codes and Standards

               • API Standards

               • NACE, MSS-SP, PFI Standards

               • Fundamentals of Maintenance and Integrity


          MATERIALS

               • API 5Land ASTM Specifications

               • Practical Aspects of Metallurgical Properties

               • Chemistry and Material Test Reports

               • Fabrication of Line Pipe and Forged Fittings

               • Mechanical Properties: Strength and Toughness


          OPERATING AND DESIGN PRESSURE

               • How to Establish the System Design Pressure

               • Introduction to Pressure Relief Valves

               • Pipe and Pipeline Sizing Formula with Applications


     DAY 2 – INTEGRITY FOR SUSTAINED LOADS

          LAYOUT AND SUPPORT

               • Rules of Good Practice in Layout

               • Pump and Compressor Piping

               • How to Support a Piping System

               • Review of Support Types and Their Application

               • Lessons Learned from Poor Support Practices


         TEMPERATURE EFFECTS

               • Flexibility Layout Analysis

               • Temperature Transients and Fatigue Damage


          VIBRATION IN SERVICE

               • Mechanical and Hydraulic Induced Vibration in Piping

               • How to Measure, Analyze and Resolve Vibration


      DAY 3 – INTEGRITY FOR OCCASIONAL LOADS

          PRESSURE TRANSIENTS

               • Recognizing and Solving Liquid Hammer

               • Pump Station Transients

               • Study of Pipeline Failures Due to Transients

               • Two-Phase Liquid-Vapor Transients

               • Two-Phase Liquid-Gas Transients

               • Gas Discharge Transients


          BURIED PIPE

               • Soil Loads

               • Surface Loads

               • Expansion of Buried Pipe

               • Soil Settlement

               • In-Service Movement of Pipeline


           PIPELINE FAILURES

               • Study of Case Histories

               • Understanding Why Failures Occur and How to Avoid Them


      DAY 4 – MATERIAL FLAWS AND INSPECTIONS

          WELDING

               • Overview of Pipe and Pipeline Welding Practice

               • API 1104 and ASME IX Requirements

               • Welding In-Service: Challenge and Solutions


           INSPECTION

               • Weld Inspection Techniques

               • Pigging Technology: Overview of Utility and Smart Pigs

               • Overview of Regulations for In-Line Inspections


          FLANGE AND MECHANICAL JOINTS

               • Overview of Different Types of Flanges and Application

               • Gasket and Bolt Selection

               • Causes of Flange Leaks and How to Resolve

               • Case Study of Flange Failure

               • Assembly of Flange Joints and Leak Tightness


          PRESSURE AND LEAK TESTING

               • The Difference Between Leak Testing and Pressure Testing

               • Review of Different Testing Techniques

               • The Purpose of Hydrotest

               • How to Conduct a Hydrotest

               • Pipeline and Piping Systems Testing

               • Pneumatic Testing


       DAY 5 – CORROSION, ASSESSMENT AND REPAIRS

          CORROSION

               • Introduction to Practical Corrosion

               • Classification of Corrosion Mechanisms

               • General Wall Thinning

               • Local Corrosion: Galvanic Effects

               • Crevice Corrosion

               • Pitting Corrosion                 

               • Environmental Effects

               • Hand H2S Effects

               • Microbiological Corrosion

               • Corrosion Protection

               • Cathodic Protection Overview


         MECHANICAL DAMAGE TO PIPELINES

               • Dents and Gouges

               • Ripples and Buckles


          FITNESS-FOR-SERVICE OVERVIEW

               • Application of ASME B31G to Determine Remaining Life

               • Application of API 579 to General and Local Corrosion

               • Analysis of Dents and Gouges in Pipelines

               • How to Evaluate Cracks in Piping and Pipelines


          REPAIR TECHNIQUES

               • The New ASME Repair Standards

               • The Fundamentals of Repair Packages

               • Pipe and Component Replacement

               • Grinding and Welding

               • Welded Sleeve: Type A and Type B

               • Flush Patch Repair

               • Fillet Welded Patch

               • Weld Overlay Repair

               • Mechanical Clamp with Sealant Injection

               • Mechanical Clamp without Sealant Injection

               • Insertion Liners

               • Painted and Brushed Liners

               • Pipe Coating


30 Sobbhy Fahmey St. - Ard El-Golf - Heliopolis - Cairo - Egypt
Tel: +201001029959/+201066687900/+202 24199019 – Fax: +202 24170419
www.aactd.net E-mail: training@aactd.net
ISO 9001:2008 Certificate No. 01 100 105040 - TUV Rheinland - Germany – WWW.TUV.COM